Scorpion Solid‐State Digital Electronic Blaster’s Ohmmeter
| Electrical | |
|---|---|
| RANGE: | 0 – 1,999 Ohms |
| ACCURACY: | 99.7% rounded to nearest 0.5 Ohm |
| TEST CURRENT: | 2.3mA (0.0023A) |
| DISPLAY: | Digital LED |
| ELECTRONICS: | Internally Fused, Current Limited, Blasting Safe |
| ON STATE: | Immediate when circuit present on contacts |
| Mechanical | |
| DIMENSION: | 3” wide x 1.5” thick x 4” high (7.6cm x 3.8cm x 10.1cm) |
| WEIGHT: | 14 oz w/battery (397g) |
| CASE MATERIAL: | HD Urethane |
| HARDWARE: | Aluminum, Nylon |
| INGRESS: | IP67 (1m) |
| OPERATING TEMP: | Tested to -20°F – 140°F (-29°C – 60°C) |
| COLORS: | Black |
| Power Source | |
| BATTERY: | 1 Replaceable 9V |
| LIFE: | Typically 3 years with moderate use & storage results may vary |
| FEATURES | |
| BATTERY: | Battery loads smoothly through side of unit and is secured in place by easy-on/off battery cap |
| WARRANTY: | Lifetime warranty against manufacturing defects |
Scorpion devices are built with the highest quality electronics and components so you can count on them to work in even the most unforgiving environments. Engineered for long life, Scorpion devices continue to provide reliable performance for decades in the field where other manufacturers break down after only months.
Scorpion units are designed with a waterproof battery compartment for quick and easy replacement. No need to remove screws and, as with competitors machines, expose the wiring and internal components just to change the batteries. EIT developed the one step on and off compartment cover to let you replace a battery anywhere- no tools required.
