Scorpion Solid‐State Electronic Non‐Electric Initiator
NON-ELECTRIC INITIATION | |
---|---|
FIRING ENERGY: | 2,500 VDC @ 0.5 Joules |
FIRING CAPABILITY: | Non Electric Shock Tube |
FIRING CAPACITY: | 1 Shock Tube Connector (STC) |
FIRE INITIATION: | In-Tube Electrode Insertion |
ARMED INDICATOR: | High visibility green LED |
SAFETY | |
OUTPUT: | STC protected in recessed socket |
ABORT: | Safe internal discharge when ‘Arm’ switch is released prior to ‘Fire’ |
FIRING: | Requires sequenced 2 switch operation |
MECHANICAL | |
DIMENSION: | 3” wide x 1.5” thick x 4” high (7.6cm x 3.8cm x 10.1cm) |
WEIGHT: | 15 oz w/battery (425g) |
CASE MATERIAL: | HD Urethane |
HARDWARE: | Brass, Nylon, Rubber |
INGRESS: | IP67 |
OPERATING TEMP: | Tested -20°F -140°F (-29°C -60°C ) |
STORAGE TEMP: | Tested -45°F 180°F (-42°C -82°C )- |
COLORS: | Black, Yellow, Tan, OD Green |
POWER SOURCE | |
BATTERY: | Replaceable 9V (HD alkaline recommended) |
LIFE : | ~300+ Charge/Fire Cycles typical |
FEATURES | |
CONNECTION: | EIT’s STC and Shock Tube Retention Posts |
SWITCHES: | Switchguard protected, rugged waterproof boots |
CARRYING: | Dual attachment points for belt loop or lanyard |
BATTERY: | Battery loads smoothly through side of unit and is secured in place by easy-on/off battery cap |
Scorpion devices are built with the highest quality electronics and components so you can count on them to work in even the most unforgiving environments. Engineered for long life, Scorpion devices continue to provide reliable performance for decades in the field where other manufacturers break down after only months.
Scorpion units are designed with a waterproof battery compartment for quick and easy replacement. No need to remove screws and, as with competitors machines, expose the wiring and internal components just to change the batteries. EIT developed the one step on and off compartment cover to let you replace a battery anywhere- no tools required.